Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Don, I am looking at similar tractors. Comparisons to the Ku 2710 (27 hp)are a JD 4200 (26.3 hp, Cub 7265 (26 hp)and a NH 25TC (25 hp). PTO hp is more indicative of actual power, but it differs based on manual or hydro transmission. PTO hp of each is proportional to the engine hp with Hydro transmission (5-6 hp less than engine, except the Kubota which has a 7 hp decline). Sizes of tractors are very similar (about 65" wheelbase, 53" wide, 85" high and 115" long except the Kubota which is 99" long. Each has dual hydraulic pumps so the power steering operates when you operate a loader. All have wet disc brakes, approximate radius turn and a three speed hydro range. Here are the major differences. The Kubota weighs about 700# less than the others because it has a steel frame. The other have cast iron components connected which comprise the frame (engine block, transmission and rear axle). similar to an agricultural tractor. The Kubota has a 4 cyl engine, the other's three. Elsewhere on CTB is a long discussion of 3 vs. 4, but essentially, no real difference at this hp level. The Kubota has a steel body, similar to the Cub. The JD and NH use a composite body and rollcage design. Kubota has a smaller gas tank than all and a lower capacity loader than all others. The Kubota mid PTO must also run at a higher RPM 2537 vs 2000 for the others. Kubota also has smaller tires compared to the rest. Other than JD, Kubota holds its value better than the others at resale. When you get the other responses many will hype their favorite "color" for various reasons. . I'm no expert, but I can read spec sheets, and the above are just a summary of facts. I found the three things to buying are: Quality for cost, a good dealer, and determining what the purpose of the tractor will be for to decide on features and size. Prices for tractors vary by region. Some KU is higher than others, some lower. You need to shop for a good dealer and a fair price. Hope this helps.

kubota 2710 size
Kubota Tractors
Replies 21 Post by Jim in Pa

After reading the above threads, I took another test drive of both the Cub and JD. I'm still hung up on the Cub have a steel hood, side panels, platform and fenders compared to the JD composite. Could those of you who own the 4000 series comment on the durability and wear of this new composite. I know the JD has a tubular frame under the platform, but I have to imagine that I'll step up to the platform, catch my boot and rip the edge off the composite. Any insight would be appreciated. Thanks.

JD 4300 vs Cub Cadet 7305
John Deere Tractors
Replies 28 Post by Jim in Pa

I've been looking at the Cub 7305 with a similar set-up to yours. I'm comparing it to a JD 4300. I like the way the Cub is built, but I don't particularly like the loader controls. Could you share some thoughts on how you like your Cub?

Sorry Kubota Lost
Kubota Tractors
Replies 2 Post by Jim in Pa